Introduction

The NCM Cru7 is a true cruiser hybrid E-bicycle and a perfect bike for those casual,axing rides around your neighbourhood on bike paths or at the beach. Designed for gliding through city streets and effortlessly handling light trail journeys, the NCM Cru7 e-cruiser bike lets you sit back andax, safe in the knowledge that your e-bike has you covered, powered along with exceptional design and components crafted for maximum range.

Key Features

• Ergonomic bicycle Grips
• Comfortable sitting posture
• Easy handling of the components
• Adjustable handlebar for a good driving position
• All important controls are easily accessible
• Built-in GPS (Battery Tag Technology)
• Intelligent Torque Sensor for smooth rides
• Supplied with 48V to deliver a high output power
• Up to 500W Peak Motor Power
• Over 912Wh capacity for a long distance
• Up to 180km Battery Range (depending on the conditions)
• Battery integrated in the frame for better aesthetics
• Easily removable battery so you can charge it anywhere
• A built-in USB port with 5V to charge mobile phones

Das kit 250W-500W Motor

Das Kit C8 Display

48V battery with USB

Built-In Location Tracker

Specifications

Sizing Chart

Warranty

• Leon Cycle provides 1-year warranty on all electronic parts (including battery, motor, controller, display, lights)
• Leon Cycle provides 2-year warranty on the bike frame.
• Apart from manufacture defects that could be present, parts that wear due to normal use (such as tires, brake pads, chains, spokes, freewheel, tire puncture etc) are not included in the warranty but maybe replaced on a case by case basis within the first 6 months.
• Our bikes are water resistant but not waterproof. Water damage is not covered under warranty.

About NCM

NCM Bikes, founded in 2014, has quickly become one of the largest pedelec and e-bike brands in Europe with the goal of expanding the market significantly in the near future. NCM is the perfect brand to start your pedelec experience whether you are an avid cyclist or aative newcomer, we are committed to providing you with a range of high quality. Our innovative technologies ensure that we can differentiate ourselves from the competition and continue to offer the latest technologies. Our goal is to help improve the environment through a friendly riding experience and the promotion of a fun and active lifestyle.

Notes

In order to ensure our high quality standard, our bicycles are subjected to a functional test at the factory. This can lead to dust deposits on the tyres and the seat post. Our bikes are only delivered pre-assembled, a final fine adjustment and inspection by the buyer or a third party is necessary (costs incurred for this cannot be covered). Before riding, please check all screws for strength and carry out a fine adjustment of the gears and brakes. Check the tyre pressure. Depending on the bicycle model, the final assembly and inspection of the components should take between 60 and 90 minutes.

Our E-Bikes meet the following standards:

EPAC EN15194 (limited to 25km/h, 250W motor)
Chargers registered with Australian ERAC as approved for use in AU
Batteries meet international standards IEC 62133-2:2017 (inc battery management)

IMPORTANT NOTICE:
The laws around the use of scooters/e-bikes on public lands, roads and areas vary from state to state.
We recommend you always check your local council and road traffic laws prior to using a scooter/e-bike to ensure you are aware of any restrictions that may affect the use of motorised vehicles.
Always use appropriate protective riding equipment such as an approved helmet and suitable clothing.

In the box

• 1 x Cru7s E-bike
• 1 x Das-Kit 48v charger
• 1 x tool kit

(P-Miami-Cru7s)